CBR1000RR and CBR1000RR-R are not the same product name, so do not choose a carbon-fiber fender from “CBR1000RR” alone. S1carbon currently separates Honda CBR1000RR 2017–2026 listings from Honda CBR1000RR-R 2021–2026 listings. Match the full model designation, year and component before ordering, and do not assume the two listing families are interchangeable.
Key takeaways:
- CBR1000RR and CBR1000RR-R have separate S1carbon product records.
- The inspected CBR1000RR listings state 2017–2026; the inspected CBR1000RR-R listings state 2021–2026.
- A shared year does not prove that a part crosses between the two model names.
CBR1000RR vs CBR1000RR-R listing map
| Listing family | Stated years | Verified components inspected | Do not assume |
|---|---|---|---|
| Honda CBR1000RR | 2017–2026 | Front fender, rear fender, chain guard | That an RR-R listing is the same part |
| Honda CBR1000RR-R | 2021–2026 | Front fender, rear fender | That a CBR1000RR listing is the same part |
The table reflects current product titles and fitment lines. It does not claim that cross-fitment is impossible; it shows that cross-fitment was not established by the inspected evidence.
If your bike is a CBR1000RR
Use the product family that explicitly names Honda CBR1000RR 2017–2026. The inspected options are the front fender, rear fender and chain guard.
Confirm the exact year, part location and mounting area. If the bike has non-standard bodywork, suspension components, brackets or nearby accessories, ask the seller to check your configuration rather than relying only on the year range.
If your bike is a CBR1000RR-R
Use the separate product family that explicitly names Honda CBR1000RR-R 2021–2026. The inspected options are the CBR1000RR-R front fender and CBR1000RR-R rear fender.
Do not remove the final “-R” when comparing listings. A search result or marketplace title may shorten the model name, but the exact product page should match the full designation shown for your motorcycle.
Why the overlapping years do not settle fitment
The two listing families overlap from 2021 onward, yet the inspected records keep the model names and product handles separate. Year is therefore only one field in the decision. The full check is model designation, year, component, mounting points and nearby modifications.
Follow the general motorcycle carbon-fiber fitment checklist before payment. It provides the reusable process without claiming that one Honda listing fits another.
Pattern and finish choices
The five inspected product records list Twill, Plain, Forged Carbon and Honeycomb variants with Glossy or Matt finishes. Choose appearance only after selecting the correct model family and component. The pattern guide and finish guide explain those visual choices.
Five checks before ordering
- Read the full model name on the motorcycle documentation: CBR1000RR or CBR1000RR-R.
- Match the exact year to the stated product range.
- Select the correct component: front fender, rear fender or chain guard.
- Compare mounting points and disclose nearby modifications.
- Confirm the exact pattern and Glossy or Matt variant.
Limits of the available evidence
No verified cross-fitment statement, installation time, torque specification, complete hardware list, measured weight, performance result, certification or road-legality statement was available. This guide therefore routes buyers to the exact listing rather than claiming interchangeability or incompatibility.
Bottom line
Start with the complete Honda model name, not the shared “CBR1000RR” text. Choose the 2017–2026 CBR1000RR listing family or the separate 2021–2026 CBR1000RR-R family, then verify the component and mounting area. The safest decision is the exact product page that names your model and year.